|
Laboratory Fermentor:
1. Autoclavable Laboratory Fermentor.
2. High Performance in-situ Sterilizable Laboratory Fermentor.
1. Autoclavable Laboratory Fermentor.
Salient Features :
- Single wall glass with stainless steel end caps.
-
Non - welded head plate construction § Cartridge heater and water
circulation loop for effective temperature control § Capacityrange: 31
and 51, interchangeable shell with same head plates
- Easy to remove - self aligning motor.
- Motor drive with Tacho feed back for DC Motors
- Twin, tri and quad versions are available.
- Ergonomically designed for easy operation and servicing.
- Flexibility of various control combinations and custom design.
- Complete unit with standard utilities.
- Superior design for optimal heat and mass transfer for high cell density.
- Dip sampling facility § Gas mixing units.
Autoclavable Fermenter Specifications:
| Vessel | Total Capacity | 3 | 5 |
| Working Maximum (L) | 2 | 3 |
| MCC | Glass & Stainless Steel |
| | Controller |
| LA1 - Independent Controllers |
|
|
| LA2 - PLC |
| | Temperature | Range | Fermentation : From 50C above coolant temperature to 500C |
|
| Sensor | Platinum RTD |
| | Agitation | Drive | DC Motor - Easily |
| | removable - Top drive |
|
|
|
| Range | 100-1000 rpm |
|
| Control | DC Drive |
|
| Impellers | Four / Six blade Rushton turbine impellers. Other impellers optional |
|
| Indication | Digital Display |
| | Aeration | Air Flow | Standard Rotameter. |
| | Thermal Mass Flow Meter / |
|
|
| | Controller is offered as option |
|
|
|
| Inlet / Exhaust Filter | 0.2 micron autoclavable |
| | PTFE (Disposable) |
|
|
|
| Condenser | Exhaust condenser - Glass to |
| | minimize evaporation |
|
|
|
| Gas Mixing Unit | Optional |
| | pH | Range | 0 - 14 |
|
| Probe | Gel Filled probes |
|
| Control | Through peristaltic pumps. |
| | Dissolved Oxygen | Range | 0-100% |
|
| Probe | Polorographic |
|
| Control Mode | Control through air flow or speed or |
| | cascade in LA2 models |
|
|
| | ANTIFOAM | Control | Level Switch and Peristatic Pump |
| | Electrical Data | Power Basic (KVA) | 0.5 | 0.5 | | Continuous Culture |
| Optional |
| | Software |
| OPC server |
|
|
|
|
|
2.High Performance in - Situ Sterilisable Laboratory Fermentor:
This
range of innovatively designed fermenter is suitable for cultivation of
microbial, recombinant, and other cell culture systems in Pharma and
Biotech Research Labs.
Salient Features:
- Ergonomically designed for easy operation and servicing.
- Flexibility of various control combinations and custom design.
- Complete unit with standard utilities.
- Superior design for optimal heat and mass transfer for high cell density.
- Dip sampling facility.
- Gas mixing units.
- Jacketed stainless steel vessel with fine internal surface finish.
- Sight glass for viewing maximum and minimum working volume.
- Powerful illumination for clear view of the contents.
- Capacity Range: 3liters, 5 liters, 7 liters, 10 liters and 14 liters.
- Provision for Hot / Chilled Water circulation for temperature maintenance.
- Twin, Tri and Quad versions are available.
In-situ Sterilisable Laboratory Fermenter Specifications:
tr>
| Vessel | Total Capacity | 3 | 5 | 7 | 10 | 14 |
| Working Maximum (L) | 2 | 3 | 5 | 7 | 10 |
| MCC | Stainless Steel |
|
|
|
| | Controller |
| LS1 - Independent Controllers |
|
|
|
|
|
| LS2 - PLC |
|
|
|
| | TEMPERATURE | Range | Fermentation: From 50C above coolant temp. to 600C |
|
|
|
|
| Sensor | Platinum RTD |
|
|
|
| | AGITATION | Drive | AC Motor with mechanical seal, easily |
|
|
|
| | removable - Top drive |
|
|
|
|
|
|
| Range | 100-1500 rpm |
|
|
|
|
| Control | Inverter based speed controller |
|
|
|
|
| Impellers | Four / Six blade Rushton turbine impellers. |
|
|
|
| | Other impellers optional |
|
|
|
|
|
|
| Indication | Digital Display |
|
|
|
| | AERATION | Air Flow | Standard Rotameter. |
|
|
|
| | Thermal Mass Flow Meter / |
|
|
|
|
|
| | Controller is offered as option |
|
|
|
|
|
|
| Inlet / Exhaust Filter | 0.2 micron autoclavable PTFE filter cartridge |
|
|
|
| | with stainless steel housing |
|
|
|
|
|
|
| Condenser | Exhaust condenser to minimize evaporation |
|
|
|
|
| Gas Mixing Unit | Optional |
|
|
|
| | pH | Range | 0 - 14 |
|
|
|
|
| Probe | Gel Filled probes |
|
|
|
|
| Control | Th rough Peristaltic pumps. |
|
|
|
| | DISSOLVED OXYGEN | Range | 0-100% |
|
|
|
|
| Probe | Polorographic |
|
|
|
|
| Control Mode | Control through air flow or speed or |
|
|
|
| | cascade in LS2 models |
|
|
|
|
|
| | ANTIFOAM | Control | Level Switch and Peristatic Pump |
|
|
|
| | ELECTRICAL DATA | Power Basic (KVA) | 0.8 | 1.1 | 1.2 |
|
| | CONTINUOUS CULTURE |
| Optional |
|
|
|
| | SOFTWARE |
| OPC server or SCADA package |
|
|
|
|
|
